Marine Stainless Steel LED Outdoor Wall Light 36W 45W, IP69K Vessel Lighting

Product Description

1. General Information
These instructions should be read carefully and retained for further reference and maintenance.

2. Safety
• Before installation or maintenance, ensure the mains supply to the luminaire is switched off and the circuit supply fuses are removed or the circuit breaker turned off.
• It is recommended that a qualified electrician is consulted or used for the installation of this luminaire and install in accordance with the current IEE wiring and Building Regulations.
• Check that the total load on the circuit including when this luminaire is fitted does not exceed the rating of the circuit cable, fuse or circuit breaker.


3. Technical Specifications
• 230V AC 50 Hz/ 60Hz or 24-32VDC 
• This luminaire is of class I construction and must be earthed
• 8-15W LED can be replaceable LED engine 
• Energy Efficiency: Class A++
• Energy Usage: 10-15.4KwH/1000H
• Lumen Output: 900-1800lm
• Colour Temperature: 3000K, 4000K, 5000K
• IP66 IP67 IP69K Rated suitable for restricted external applications
• CE Approved
• Dimensions: 295mm x 147mm x 104mm



TECHNICAL DATA
 

Total lumens:	720-1800lumen	Colour temp:	3000K / 4000K / 5700K
Power supply:	220-240V, or 12V/ 24V / 32V	CRI:	>70 Or >97 (Full spectrum)
Wattage:	8 Watt / 10 Watt / 15 Watt	Control gear:	included
IP Rating:	IP66 / IP67 / IP68	Technology field:	LED
Colour:	Silver / on requests	Emergency system:	on requests

FEATURES

----316 & 304 Stainless Steel
----Germany & UK & Norway registered® designs
----UV stabilised, & supplied with stainless steel screws
----Alumium base and lenses diffuser UGR<19
----Impact resistance rating IK08 or IK10

Basic Info

Model NO.	IP69K Tri-proof LED Light	Life Time	50000h
CRI	>80 or >97	Light Source	led engine
Power Factor	>0.9	IK rate	IK07 or IK10
IP Grade	IP69K and IP67	Trademark	LCD brand
Input Voltage	AC200-240 (50/60Hz) or 20-32VDC	Transport package	1pcs/box
Lumen Efficiency	130lm/W -150lm/w	Specification	600/1200/1500MM
Beam angle	180 Degree or 360 degree	Origin	Shenzhen
Working Temp	-30 - +45	HS Code	9405409000
Warranty	5 Years

 

 

Features:
1. Anti-High pressure water washer IP69K, water-proof IP67
2. With PMMA tube for impact rate IK07 and with PC tube for impact rate IK10
3. Anti-ammonia steam
4. Against water pressure of 100bar (1450psi) and temperature of 80ºC
5. System efficiency up to 120lm/w & 150lm/w option
6. High CRI >70 or full spectrum CRI>97 good for human sleeping and health
7. UGR<19 option="" />8. Linkable options with quick connection
9. Enviromentally friendly, no mercucy, No UV, No IR
10. Wide beam angle 180° or 360°
11. Energy Efficiency Grade: A++
12. Quick Start instant 100% luminous flux
13. Flicker Free driver
14. 5 Years warranty on complete fixture. (LED's Driver & Housing)
15. Certificate: CE, RoHS, Certified
16. Surface Mount of suspended



Installation way


Application

Reading room
kitchen room
dinning hall
Bedroom
basement
Lab
School
Hospital
Food process factory
etc

AC 220-240VAC 50/60Hz 2700k-6500K IP66 IK07 10W-300W Exterior Led Flood Lights
Dimmable led spotlight floodlight bulbs 10-300W 220VAC 50/60Hz 6500K IP65 IK07 5year warranty


Hightlight:

• Energy Saving with PLC dimmer system for 75-85% power saving.
• High quality with LED SMD3030 & SMD5050.
• High lumen output up to 150lm/w.
• High Heat-sink housing efficiency.
• Weather proof IP66
• Light Weight
• Elgent design
• Dimmable: 1-10V / PLC dimmer / DALI

Specifications:

Wattage	100W	150W	200W	250W
Light source	SMD 3030 or SMD5050
Lamp Luminous Efficiency(lm/w)	145- 155 lm/w
Lamp Luminous Flux(lm)	14500	21750	29000	36250
Color Temperature(CCT)	2800-3000K, 4000-4500K, 6000-6500K, 7000-7500K
CRI (Ra>)	>70 @ 6500K, >75 @ 4000K, >80 @ 3000K
Input Voltage(V)	AC85-265V 50/60Hz / 12V 24V 32V DC
Housing Matrial	Copper free die-cast Aluminum alloy ADC12
Driver	Meanwell driver ,SOSEN, MOSO, PH driver etc
Driver efficiency	≥0.9%
Power Factory(PF)	≥0.97
Working Temperature(ºC)	-70ºC~60ºC
IP Ratin	IP66
Angle Beam (Degree)	10º 20º 30º 10x45º 60º 90º 120º TYPE I II III IV
Certificate	CE, ROHS, EMC, LVD, TUV, SAA,IEC
Warranty(Years)	5 Years

 

Area & Landscaping floodlight 200W

Brighten large outdoor spaces with our slim of high-power LED flood lights. Fixtures feature adjustable mounting brackets, allowing you to focus light output with precision. Quality-tested and built to last, our LED flood lights stand up against the elements and significantly outperform traditional halogen fixtures. A top choice for a wide range of applications, including billboard and subdivision sign lighting, architectural facades, parking lots, landscaping, and area lighting.

 

Operating and Electrical

Input Voltage	220-240 VAC / 110-277VAC or 12V 24V 32VDC
Input Frequency	50 /60 Hz
Power Factor (Min)	>0.97
Controls and Dimming	PLC dimmer, 0-10V , DALI, Triac , motion sensor or Infrared induction

 

Mechanical and Housing

Housing Material	Aluminum alloy ADC12 die-casted
Reflector material	Pure polish aluminum reflector
Optic material	Polycarbonate
Optical cover/lens material	Polycarbonate
Fixation material	Carbon steel with corrosion proof powder coating or Stainless steel #316 & 304
Mounting device	Mounting bracket adjustable
Optical cover/lens shape	7° 10° 10x45° 30° Asymmetric 45° 60° 90° 120° TYPE I TYPE II TYPE III TYPE IV TYPE V
Optical cover/lens finish	transparent or Frosted
Overall length	see dimensional drawing
Overall width	see dimensional drawing
Overall height	see dimensional drawing
Effective projected area	see data sheet
Color	White and black and grey

 

Approval and Application

Ingress protection code	IP66 [ Dust penetration-protected, jet-proof]
Mech. impact protection code	IK07 [ >4 J vandal-protected]
Surge Protection (Common/Differential)	Luminaire surge protection level until 3 kV

 

Initial Performance (IEC Compliant)

Initial luminous flux (system flux)	29000 lm
Luminous flux tolerance	+/-10%
Initial LED luminaire efficacy	145 lm/W
Init. Corr. Color Temperature	3000K / 4000K / 6500K
Init. Color Rendering Index	>75
Initial chromaticity	SDCM<=5<>
Initial input power	200 W
Power consumption tolerance	+/-10%

<=5<><=5<>

 

Application Conditions / Product Data

Ambient temperature range	-70 to +50 °C
Maximum dim level	on requests
Full product code	LCD-FK-200-LNXX-4K-PLC
Order product name	LCD-FK-Flood light 200W
Order code	N
Numerator - Quantity Per Pack	1 pcs
Numerator - Packs per outer box	1 box
Material Nr. (12NC)	N
Net Weight (Piece)	6.1KG

Product Photos:

 

Dimensional drawing

 

Low Voltage 10W DC12V 1200 Lumen Outdoor LED Flood Lights

 

led outdoor flood light bulbs 10W DC12V 1200lm IP66 Aluminum die cast ADC12

 

Slim Floodlight specifications:
-- Direct lighting luminaire for use with LEDs.
-- Corrosion resistant die-cast aluminium body
-- Installation with bracket on surface and floor.
-- Mains voltage: 220-240V / 50-60Hz.
-- Clever thermal design with internal cooling pins.
-- Narrow, medium and wide beam angles available.
-- Led colour temperatures optionally 3000K, 4000K and 6000K.
-- Suitable for illumination up to 8 meter height.
-- Internal silicon gaskets ensure IP protection.
-- All external screws are stainless steel.
-- Double layer polyester powder paint resistant to corrosion and salt spray fog.
-- Up to 120lm/W efficiency (4000K - 800mA)
-- High colour consistency: <3 sdcm

Application:

Floodlight with broad spread light distribution. Various lighting tasks can be implemented such as floodlighting building surfaces, walls, plants etc. The use of LED technique offers optimal light output with low power and durability as well.

Products features

Material	Aluminium die cast ADC12 housing +4mm temper glass face
Efficacy	up to 178 lumen /watt
LEDs chip	Cree SMD5050
SDCM	<5<>
FK flood driver	Meanwell & driver
Optic beam	7°, 15°, 30°, 60°, 90°, 120°, TYPE 2/3/4/5,Asymmetric 40
Ingress protection	IP66
Mech. impact protection code	IK08 Impact rating
Mounting	"U" bracket / slipfitter

without compromising light quality or a sense of security for those in the area.
 

Outdoor Pure Aluminum housing dimmable driver 1-10V water-proof IP65
30 Watt LED Flood Light 110-305V 50/60Hz or 12-32VDC
Dimmable for DALI or Triac dimmer high lumen output 4050lm IK07
Car Parking or area lighting with Cree Luxeon SMD3030 or SMD5050 LEDs chip for LED street Light & working site
Copper free pure Aluminum forming extruded heat-sinking house LED spotlight 30W for outdoor Security lighting with 5-7 years warranty

 

This luminaire was designed for its use in area, architectural or security lighting, for visible or highlighting elements of particular interest and adding high a esthetic value to buildings, monuments,etc.Available with two suspension systems: with bracket or arm on requests.

Feature

1. A simple, durable, reliable and efficient LED floodlight with Pure Aluminum forming tech. extrude the heat-sink housing for perfect thermal management than the die-casting's housing.
2. Low lifetime-cost Reduce power consumption and free maintenance
3. Market leading size/weight/output ratio for high performance true symmetric or asymmetric luminaire with low aesthetic impact.

Product Specification review

A simple, durable, reliable and great thermal management and efficient LED floodlight

Consumo Consumption	Altura de montaje Assembling height
10w 20W 30W 50W 70W 100W 150W 200W	2-15meter
Voltaje Voltage	Frecuencia Frequency
100-277 V AC or 10-24VDC	50/60 Hz
Grado de Protección Protection level	Óptica Optic
IP65 IK08	Eficiencia / Efficiency : 90%
FHS UHF	Vida útil Life span
<1%<>	L70 - 50.000h

Application review

- Low area & job site lighting
- Building surrounds
- Façade lighting

- Car parking lighting

- Road & billboard lighting

 

 

Project details:
Building with Surrounds: 300m2
Energy costs: 0.12 $usd/kWh
Illuminance: 50lx
Calculation period: 15 years
Changing lamps every 2 years for the traditional/non-LED solution
LED: Cleaning the luminaires every 3 years
Operating hours: 4380 h/a
All calculations are based on an annual increase of energy and operating costs of 5%.

 

Product dimension review

Mounting options
Three mounting options to cover all low area lighting applications.

Wall or ceiliing mounted --Area & site

Surface mounted--Facade

Mast & Post--Road & Car Parking

 

Installation review

HYLY features a super lightweight design and is pre-wired for effortless installation.

Slim, compact and lightweight Market leading size/weight/output ratio for high performance with low aesthetic impact.

FLY's lean lightweight design also makes it easy to carry, install and integrate onto existing structures.

Pre-wired. Quick and easy installation with no wiring.

 

 

Low Voltage 30W DC12V 4050 Lumen Outdoor LED Flood Lights

 

led outdoor flood light bulbs 30W DC12V 4050lm IP66 Aluminum die cast ADC12

 

Slim Floodlight specifications:
-- Direct lighting luminaire for use with LEDs.
-- Corrosion resistant die-cast aluminium body
-- Installation with bracket on surface and floor.
-- Mains voltage: 220-240V / 50-60Hz.
-- Clever thermal design with internal cooling pins.
-- Narrow, medium and wide beam angles available.
-- Led colour temperatures optionally 3000K, 4000K and 6000K.
-- Suitable for illumination up to 8 meter height.
-- Internal silicon gaskets ensure IP protection.
-- All external screws are stainless steel.
-- Double layer polyester powder paint resistant to corrosion and salt spray fog.
-- Up to 120lm/W efficiency (4000K - 800mA)
-- High colour consistency: <3 sdcm

Application:

Floodlight with broad spread light distribution. Various lighting tasks can be implemented such as floodlighting building surfaces, walls, plants etc. The use of LED technique offers optimal light output with low power and durability as well.

 

Products features

Material	Aluminium die cast ADC12 housing +4mm temper glass face
Efficacy	up to 178 lumen /watt
LEDs chip	Cree SMD 3030 / SMD5050
SDCM	<5<>
Optic beam	7°, 15°, 30°, 60°, 90°, 120°, TYPE 2/3/4/5,Asymmetric 40
Ingress protection	IP66
Mech. impact protection code	IK08 Impact rating
Mounting	"U" bracket / slipfitter